krolik
This is going to be a higher-security network services host, mostly to host LDAP and maybe some associated services.
- Maxtang MAX-N100-A5 Mini PC (Intel N100, 4x E-cores, 16gb RAM)
- Intel N100, 6MB cache, up to 3.4GHz
- 1x SODIMM slot, DDR4
- 2x 1gb NIC ports
- M2 2280 slot for PCIe 3.0 4x NVME/SATA
- M2 2280 slot for PCIe 3.0 1x NVME
- M2 2230 slot for wifi and bluetooth
- 2x HDMI 2.0, 1x USB 2.0, 3x USB 3.2, 1x audio jack
- 120x120x36mm
- Internal PSU draws 1.5A from mains, producing ~45W DC power
- Box specs
- Colour: grey
- Memory: 16gb
- Storage: 512gb
- PN: GM0MAXN100001005
- SN: DT2024120402001
AlmaLinux 9.5
- LAN MACs
enp1s0: e8:ff:1e:d5:60:7a (this is the primary NIC, despite having a higher MAC address)
enp2s0: e8:ff:1e:d5:60:79
- located at home
Contents
Build notes
Build a clean Alma9 system than add FreeIPA to it.
Prepare network
This will live in a new VLAN, with firewalling done on helian.
This is using a new subdomain because of FreeIPA. It's optional, but I want to try letting it manage its own DNS, which it could provide to all the clients.
int.thighhighs.top
Prepare helian:
Create it in bridge-VLANs - ID 53 - tagged on liv2-SABRINA, bed3, and local - comment "Secure infra services" Create an interface-VLAN - name SecureInfra53 - ID 53 - Interface: local Add an IP address on the VLAN - 192.168.53.1/24 - network 192.168.53.0 - on interface SecureInfra53 Update the Network on the DHCP Server for krolik and ksenia - address 192.168.53.0/24 - gateway 192.168.53.1 - mask 24 - DNS server 192.168.1.26 - domain thighhighs.top - next server 192.168.1.71 - boot file name grub/grubx64.efi Create an IP pool for it - name: vlan53 - addresses: 192.168.53.10-192.168.53.30 - next pool: none Create a new DHCP Server for the segment - name: secure infra - interface: SecureInfra53 - address pool: vlan53 Update DHCP lease for krolik to give correct address - address: 192.168.53.10 - server: secure infra Boot it up and hope it works!
The VLAN is piped through to sabrina where we need to configure that too. This is simpler because sabrina has no presence on the VLAN, it's just VLAN-assigned ports:
Create it in bridge VLANs - bridge: bridge - VLAN IDs: 53 - tagged: ether16, sfp-sfpplus1 - untagged: ether13 Comment on the bridge-port: krolik Configure the bridge-port - PVID 53 - Admit only untagged
Do firewalling on helian:
- We can't use in/out ports because it's part of the bridge, and we don't want to enable ip-firewalling on the bridge because it'll slow it down, so we'll just use src/dst IPs for now.
- Google this error for details: "in-bridge-port matcher not possible when bridge use-ip-firewall is disabled"
OS imaging
Get the MAC address, put it into azusa, grab new Alma 9.5 PXE images and set them up.
It should now build fully automatically, after poking the configs a little.
What do we want to even install here anyway?
Add krolik to thighhighs DNS, in gandi and in pihole: krolik.int.thighhighs.top = 192.168.53.10
dnf install mtr traceroute
FreeIPA
Start on the QSG: https://www.freeipa.org/page/Quick_Start_Guide
TBC