calico

Radxa Rock Pi S

Ubuntu 20.04 (custom Radxa 4.4 kernel)

Linux calico.thighhighs.top 4.4.143-65-rockchip-g58431d38f8f3 #1 SMP PREEMPT Sat Aug 14 09:31:07 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux

Located at home

Contents

calico

Build notes

Used this to write the general guide for Rock Pi S hardware.

Image and setup SSH keys

Image the SD card and let it boot, it'll get on the network with DHCP
Copy your SSH key, the password is rock
```
ssh-copy-id rock@IP
```
Login again, now it'll use your SSH key
```
ssh rock@IP
```
Set a strong random password, this will be used for both rock and root
```
passwd
```
Sudo up and set the same password for root
```
sudo -i
passwd
```
Record the new password somewhere safe
Lock the rock account now, note that this still permits key access
```
usermod -L rock
```

Grab the rock user's authorized_keys so root can use it

mkdir -m 0700 /root/.ssh
cp /home/rock/.ssh/authorized_keys /root/.ssh/
chown root:root /root/.ssh/authorized_keys ; chmod 0600 /root/.ssh/authorized_keys

Regenerate SSH host keys, we don't know what was installed with the OS image
```
rm /etc/ssh/ssh_host_*
dpkg-reconfigure openssh-server
```
- You could do ssh-keygen -A as an alternative, but it'll generate DSA keys as well which we don't want
Logout completely
Delete the entries from your known_hosts file
SSH again as root@IP, accepting the new keys. It'll use your SSH key instead of asking for password now.

Basic environment stuff

Set hostname:

hostnamectl set-hostname calico.thighhighs.top

Update hostname in /etc/hosts
Uncomment the IPv6 entries in /etc/hosts as well

Set timezone

timedatectl set-timezone Australia/Sydney

Set editor

echo "export EDITOR=vim" > /etc/profile.d/editor-vim.sh

Disable HashKnownHosts

echo -e "Host *\n    HashKnownHosts no" > /etc/ssh/ssh_config.d/99-global.conf

Configure screen

curl -o ~/.screenrc https://gist.githubusercontent.com/barneydesmond/d16c5201ed9d2280251dfca7c620bb86/raw/.screenrc

Configure top by entering this cheatcode
```
z x c b s 1.5 <Enter>
e <zero> 1 W q
```

Disable wifi and bluetooth, we don't need them and it slows down boot

systemctl disable wpa_supplicant.service --now
systemctl disable bluetooth.service --now
systemctl disable rtl8723ds-btfw-load.service --now

echo -e "# Don't load the WLAN+BT module, we don't need it\nblacklist rtl8723ds" > /etc/modprobe.d/blacklist-radios.conf
update-initramfs -u

Install useful packages

apt update
apt install -y vim screen bash-completion lsof tcpdump netcat strace nmap less bsdmainutils tzdata whiptail netbase wget curl python-is-python3 net-tools ack jq make elinks nmap whois ethtool bind9-dnsutils apt-utils man-db

Do a full upgrade then reboot
```
apt full-upgrade
reboot
```

Configure networking

What we want:

Static IPv4 addressing
Autoconfig dynamic IPv6 addressing
- Global stable IPv6 addresses (I guess)
Add a locally-defined static IPv6 address, that other hosts can refer to via DNS etc
DNS resolvers will be manually defined

We'll use netplan to do this, as it greatly simplifies getting what we want without needing to faff around with config in multiple places.

Disable IPv6 privacy addresses, they're enabled by default on Ubuntu
```
sed -r -i 's/tempaddr = 2/tempaddr = 0/' /etc/sysctl.d/10-ipv6-privacy.conf
systemctl restart procps
```
This is a nifty site for testing: http://ip.bieringer.net/ - Look at EUI64_SCOPE and see if it's random/privacy/global. Global is probably what we want for servers.
Install netplan
```
apt install -y netplan.io
```

Remove network-manager, we want to use networkd instead

apt purge network-manager networkmanager-patch
rm -rf /etc/NetworkManager/
apt autoremove

Write the network config in /etc/netplan/10-thighhighs.yaml

network:
    version: 2
    renderer: networkd

    ethernets:
        eth0:
            critical: true
            dhcp-identifier: mac
            dhcp4: false
            dhcp6: true
            dhcp6-overrides:
                use-dns: false
            ipv6-privacy: false
            addresses:
                - "192.168.1.26/24"
                # :1:26 for the .1.26 IPv4, ca6c == 51820, the default Wireguard port
                - "2404:e80:42e3:0:26:0:0:ca6c/64"
            routes:
                - to: 0.0.0.0/0
                  via: 192.168.1.1
                  on-link: true
            nameservers:
                addresses:
                    - 192.168.1.20
                    - 192.168.1.24
                    - fe80::e65f:1ff:fe1c:c6ea
                    - fe80::ba27:ebff:fe8c:f4f8
                search:
                    - thighhighs.top

Sanity check the generated config, hope it doesn't complain
```
netplan generate
netplan apply
```
Reboot and cross your fingers

Save a known-good image for convenience

On another system with an SD card reader, take an image of the system after shrinking the filesystem

e2fsck -f /dev/mmcblk0p2
resize2fs /dev/mmcblk0p2 2G
dd bs=4M count=600 if=/dev/mmcblk0 | pv -br | gzip --fast > 2021-04-20_calico_img_clean_os.img.gz

Pihole

Straightforward basic install, no conflict with other installed services.

curl -sSL https://install.pi-hole.net | bash
Cloudflare upstream
Web interface enabled, full query logging and display
Pi-hole DNS (IPv4): 192.168.1.26
Pi-hole DNS (IPv6): 2404:e80:42e3:0:1:26:0:ca6c

Admin UI at https://calico.thighhighs.top/admin/

Should probably put cloudflare resolvers into the systemwide resolver set, meaning we don't see our own records though.

1.1.1.1
1.0.0.1
2606:4700:4700::1111
2606:4700:4700::1001

Can add TLS \o/ https://discourse.pi-hole.net/t/enabling-https-for-your-pi-hole-web-interface/5771/17

Firewall

As per https://docs.pi-hole.net/main/prerequisites/ I've installed ufw and locked things down.

Limit and fail2ban would be good to do as well: https://www.raspberrypi.org/documentation/configuration/security.md

apt install ufw
ufw allow ssh
ufw enable

# Pihole stuff - https://docs.pi-hole.net/main/prerequisites/#ufw
ufw allow http
ufw allow https
ufw allow domain
ufw allow 67/udp
ufw allow 67/tcp
ufw allow 546:547/udp

Useful(?) links

Navigation