= MIKROTIK BRIDGE VLAN CONFIG =

 * create the bridge
 * create an /interface/vlan on top of the bridge
 * assign an IP address to the /interface/vlan
 * set the pvid on the bridge ports
 * define an /interface/bridge/vlan and set tagged/untagged ports. The bridge is a port as well, if you want the switch to have layer3 presence on the VLAN


== Let's deconfigure the Helena VLAN 181 from hoshino/sabrina/helian ==

We'll work on hoshino first because it's not on the current useful path.
 * /interface/bridge/vlan/remove 1
 * no pvid to change because all ports in the VLAN are trunked, so they keep pvid 1
 * remove IP address from /interface/vlan/HELENA: /ip/address/remove numbers=2
 * remove the /interface/vlan: /interface/vlan/remove HELENA

Sabrina next:
 * /interface/bridge/vlan/remove 1
 * set pvid on ether7 back to VLAN 1
 * no IP to remove because sabrina isn't present on VLAN 181
 * no /interface/vlan to remove because sabrina isn't present on VLAN 181

helian last, helian is the gateway for the Persica/Helana VLAN 181
 * /interface/bridge/vlan/remove 1
 * no pvid to remove on bridge ports because this VLAN is only tagged
 * remove the IP address from /interface/vlan/PersicaTunnel181
 * delete the /interface/vlan/PersicaTunnel181

Cleanup helena now, because I fixed her DHCP and now she's back on VLAN 1 natively
 * Delete the 10.10.181.2 IP address
 * Remove custom routing rules